Ruger American Picatinny Rail



Made in America, Talley Manufacturing’s Ruger American Picatinny Rails are machined entirely from high grade 7000 series alloy and protected with a hard-coat anodizing to 65 Rockwell ensuring the craftsmanship of these Picatinny rails last the lifetime of your firearm. These Ruger American Picatinny Rails are all designed and manufactured with precision to fit your firearm with the industry’s tightest manufacturing tolerances.  These Pic Rails provide a mounting platform for all optics mounts that have been designed in accordance with the MIL-STD-1913 Pic Rail specifications, to include all Talley Picatinny scope mounts.


Whether you are looking for a tactical scope ring, a modern sporting ring or our traditional scope ring with a Picatinny mounting system, Talley MFG has Pic Rails for all applications and firearms enthusiast.


  • American Made, Lightweight 7000 series Aluminum Alloy
  • Fully CNC Machined
  • Hard-coat anodizing to 65 Rockwell
  • Designed in accordance with the MIL-STD-1913 Pic Rail specifications
  • Available in 0 and 20MOA; Long and Short Action
  • Includes mounting screws and wrench. (1/4 6-48 Screws / T-15)
  • Designed to fit Ruger American centerfire rifles.
  • Click here for all  Ruger Options


Ruger American Picatinny Rail –  Product Dimensions and Weights

Action / MOA Rear Height1 Hole2 1 ↔ 2 Hole 2 ↔ 3 Hole 3 ↔ 4 Front Height3 Overall Length Weight
Short / Standard .440 .861″ 3.003″ .861″ .440″ 6.094″ 2.0oz.
Short / 20MOA .440″ .861″ 3.003″ .861″ .412″ 6.094″ 2.0oz.
Long / Standard .440″ .861″ 3.543″ .861″ .440″ 6.882″ 2.4oz.
Long / 20MOA .440″ .861″” 3..543″ .861″ .409″ 6.882″ 2.4oz.

1 The Rear height is measured at hole 1; from the top of the action to the top of the rail.

2 Hole 1 is closest to the shooter and hole 4 is closest to the muzzle. Hole spacing measured center to center.

3 The Front Height is measured at hole 4; from the top of the action to the top of the rail.

Torque Recommendations?

  • Ruger American Picatinny Rail to Action: Torque can depend on the receiver. Please check with the rifle manufacturer  (Ruger) to verify allowable torque into receiver. Always make sure your torque wrench is calibrated, Talley Mfg is not responsible for damage caused to scopes or firearms due to over torquing



  • Although not always necessary, using Loctite for the screws going in the receiver is perfectly fine. We do not recommend using anything stronger than Loctite Blue 242. We do not recommend using Loctite on the ring screws. Always test fit before applying any Loctite.


The Talley Guarantee: At Talley Manufacturing, we place our customers first. All our products carry a money back guarantee. If you are not completely satisfied, we make sure you will be. We want you to know you’ve just purchased the best.

You may also like…