Description
Made in America, Talley Manufacturing’s Remington Picatinny Rails are machined entirely from high grade 7000 series alloy and protected with a hard-coat anodizing to 65 Rockwell ensuring the craftsmanship of these Picatinny rails last the lifetime of your firearm. Remington Picatinny Rails are all designed and manufactured with precision to fit your firearm with the industry’s tightest manufacturing tolerances. These Pic Rail bases provide a mounting platform for all optics mounts that have been designed in accordance with the MIL-STD-1913 Pic Rail specifications, to include all Talley Picatinny scope mounts. Whether you are looking for a tactical scope ring, a modern sporting ring or our traditional scope ring with a Picatinny mounting system, Talley MFG has Pic Rails for all applications and firearms enthusiast.
For Remington Models 4-6-74-76-750-7400-7600
| Rear Height1 | Hole2 1 ↔ 2 | Hole 2 ↔ 3 | Hole 3 ↔ 4 | Front Height1 | Overall Length | Weight |
| .380″ | .605″ | 2.05″ | .862″ | .380″ | 5.469″ | 1.7oz. |
| .380″ | .605″ | 2.05″ | .862″ | .358″ | 5.469″ | 1.7oz. |
1 The rear height is measured at hole 1; from the top of the action to the top of the rail. Front height is measured over hole 4.
2 Hole 1 is closest to the shooter and hole 4 is closest to the muzzle. Hole spacing measured center to center.
Designed to fit the following Remington Model semi automatic rifles and slide action rifles:
Remington 4 – Remington 6 – Remington 74 – Remington 76 – Remington 750 – Remington 7400 – Remington 7600
Remington Model 7400 Series
This classic line of semi automatic rifles by Remington chambered in a number of standard short action cartridges. As an upgraded replacement for the model 4, the Remington Model 7400 was redesigned with a checkered pistol grip and straight-comb stock. Later improvements came with the Model 7400 Special Purpose and Model 7400 Synthetic. Regardless of you particular model, Talley has the picatinny rail and Remington 7400 scope mount for you.
Torque Recommendations?
- Remington Semi-Auto Picatinny Rail to Action: Torque can depend on the receiver. Please check with the rifle manufacturer (Remington Arms Co) to verify allowable torque into receiver. Always make sure your torque wrench is calibrated, Talley Mfg is not responsible for damage caused to scopes or firearms due to over torqueing.
Loctite?
- Although not always necessary, using Loctite for the screws going in the receiver is perfectly fine. We do not recommend using anything stronger than Loctite Blue 242. We do not recommend using Loctite on the ring screws. Always test fit before applying any Loctite.
THE TALLEY GUARANTEE
NOTHING IS TOUGHER THAN A TALLEY
The Talley Guarantee: At Talley Manufacturing, we place our customers first. All our products carry a money back guarantee. If you are not completely satisfied, we make sure you will be. We want you to know you’ve just purchased the best.
